R W I C S Telemetry System

RWICS is a system that supports the remote monitoring of various meteorological and marine conditions. With our software, RWICS Terminal for windows 95/98 and the telemetry system with a cellular phone, data transceiver or portable satellite phone, remote simulation and analysis of data is possible. RWICS control unit RWICS Terminal Features System Outline Specifications <Features> Compact Design The RWICS high-performance telemetry system can store data such as barometric pressure, wind speed and direction, air temperature, humidity, water level, insolation, rain and 7 separate temperature readings from -200 to 1300°C. Current data can be transmitted and monitored on a display in a remote location. Complies to telecommunication facilities such as NTT lines, the mobile communication network, the PHS network and data transceivers. The stored data can be transmitted over these facilities via an RS-232C cable. Using a PC, monitoring current data and presetting the time to start data logging is possible remotely. Three types of power supply Depending on the setup, three types of power supply are available: AC; 8V to 16V DC; and an internal rechargeable battery (NiMH). Using a solar panel, long hours of continuous running is possible. Logging pace setup Logging pace can be freely set from a minimum of 1 second to a maximum of 3600 seconds. The RWICS control unit can store a maximum of 12000 times the amount of data in its internal memory. GPS data printout (Optional) GPS data can be printed out. Logging GPS data with other data enables a user to determine location while the unit is on the move. <Specifications> Sensor input Item Specifications and recommended operating conditions Barometric pressure -66.7kPa to +66.7kPa (standard) Wind speed 2.0 to 60.0 m/s (option) Wind direction 0 to 360°, 16 directions (option) Humidity 0 to 100% RH (option) Air temperature -40 to 80°C (option) Water level 0 to 20m (option) Rain the sensor's surface is dry or wet (option) 7 temperatures -200 to 1300°C; K thermocouple (option) Interface Item Specifications Standard RS232C Baud rate 115200, 57600, 38400, 19200, 9600, 4800, 2400bps Method pace synchronous transmission GPS Item Specifications and recommended operating conditions Receiver Receiving 8 channels8 Tracking method parallel tracking Receiving frequency 1575.42 MHz Receiving code C/A code (L1 wave) Input/Output -40 to +80ºC RS-232C 0 to 20m Communication protocol NMEA-0183 Data update cycle approximately 1 second Geodetic and coordination system WGS-84 Working temperature range -30 to +80°C Working humidity limit to 90% RH Tracking capacity Speed to 1851.9 kmh Altitude -999.9m to 17999.9m UTC synchronous pulse precision +/- 1 microsecond Function Item Specifications and recommended operating conditions Power supply AC adapter Input voltage 100V DC Input 8V to 16V Built-in NiMH battery 4.8V 1200mAh Size 100mm(W) × 35mm(H) ×126mm(D) Weight 550g, including battery *The RWICS system will be released next year.